![background image](http://html.mh-extra.com/html/remington/lithium-beard-barba-mb320l/lithium-beard-barba-mb320l_manual_1437318007.webp)
7
ENGLISH
GB
DE
NL
FR
ES
IT
DK
SE
FI
PT
SK
CZ
PL
HU
RU
TR
RO
GR
SI
HR
UA
BG
AE
4. Be sure to move the unit slowly when performing this operation and to keep the roots
at the base of your head out of the way of the trimmer.
TO DEFINE THE BEARD/MOUSTACHE LINE
1. Hold the trimmer with the trimmer blade facing you.
2. Start with the edge of beard/moustache line and gently lower the trimmer blade onto
your skin.
3. Use motions towards the edge of the beard/moustache line to trim to desired locations
in facial area and away from beard in neck area.
BLADE RELEASE
1. Ensure the trimmer is switched off.
2. Remove the adjustable comb.
3. Remove the blades by pushing your thumb upwards under the blades and move the
blade set away from the trimmer body.
4. To reattach the blades, align the back of the blades with the back housing at the top of
the trimmer and push down until the blade set clicks into place.
TIPS FOR BEST RESULTS
• Beard, moustache and sideburn hairs should be dry.
• Avoid using lotions before use.
• Comb your hair in the direction that it grows.
USING THE EDGEStyler
The EDGEStyler
tool is used to guide your trimmer to create a symetrical, defined edge to
your beard.
Neck Line (Fig. A)
Hold the appropriate curved side of the tool underneath your jaw and run your trimmer
along it for a clean edge. Repeat on the other side then even up the remaining V left under
the chin freehand.
Cheek (Fig. B)
Hold the appropriate curved side of the tool against the cheek and run your trimmer along it
for a clean edge. Repeat on the other side of your face.
Sideburn (Fig. C)
Use the straight edge of the tool against the sideburn for perfect, straight edges.
Moustache (Fig. D)
Use the curved edge of the tool to sculpt the moustache area.
Summary of Contents for Lithium Beard Barba MB320L
Page 1: ...MB350L I www remington europe com Lithium Barba Beard Trimmer ...
Page 2: ...e f g j k l i m ...
Page 3: ...A C B D ...