21
provided. Use a small hand-held vacuum to remove dust and debris from the hand piece vents.
WARNING:
If the Flash Window is cracked or broken, the unit must not be used. Never
scratch the filter glass or the metallic surface inside the Treatment Head.
CAUTION:
The i-LIGHT
®
PRO+ Face & Body is a high voltage device. Never immerse in
water. Never clean the unit or any of it’s parts under a tap or in a dishwasher.
Storage
• Switch the unit off, unplug and allow to cool for 10 minutes before storage.
• Store the unit in a dry place at a temperature between 15º C and 35º C
Always read these instructions fully before using the i-LIGHT
®
PRO+ Face & Body
• Refer to this troubleshooting guide if you experience any problems with i-LIGHT
®
PRO+
Face & Body, as this section addresses the most common problems you could encounter
with the i-LIGHT
®
PRO+ Face & Body. If you have followed the instructions in this section
and continue to experience problems, please contact the Remington
®
Service Centre for
further assistance.
The power switch is ON, but the unit is not working.
• Make sure the unit is plugged into a working electrical outlet.
• Try switching to a different outlet.
The unit appears to have cracks or is broken.
• Do not use if the unit is damaged. If you have concerns about using the unit, discontinue
use and contact the Remington
®
Service Centre for further assistance.
I have switched the unit ON, but I cannot increase or decrease
the energy level.
• Try resetting the unit by turning it off and waiting several seconds before turning it back on.
TROUBLESHOOTING
