17
2. Hold the attachment with one hand while pressing
both Attachment Release Buttons with the other
hand and pull gently (Fig 16).
3. Gently push the other attachment back into the
Hand Piece making sure both side tabs click into
place.
NOTE:
the longer tab (with gold circuits) must be on top to properly fit.
• Store the unused attachment in a safe location (such as in the packaging) taking care
not to damage the Flash Window and other components.
• The i-LIGHT
®
PRO Face & Body is equipped with two operating modes: Single Flash
Mode and Multi-Flash Mode. Your i-LIGHT
®
device will automatically be set to Single
Flash Mode each time the device is powered ON.
•
Single Flash Mode:
The i-LIGHT
®
will flash each time the Flash Button is pressed. This
mode is ideal for precision treatments of the face and small areas.
•
Multi-Flash Mode:
The i- LIGHT
®
device will flash the Flash Button is pressed and will
continue to flash every 3 seconds when the skin contact sensors are fully engaged. The
Multi-Flash mode allows you to quickly treat large areas by simply gliding the hand
piece over the skin after each flash.
How To Treat
1. Place the Flash Window firmly against the skin - ensure the Skin Contact Sensors are
fully engaged
NOTE:
When the Skin Contact Sensors are fully engaged you will hear a ‘chirp’ and the
Bulb Status Indicator Display will illuminate green.
2. Press the flash button to deliver a flash. You should expect to see a bright flash of
light (similar to a camera flash), and you should feel a mild sensation of warmth.
3. Move to the next area and treat in a grid like pattern to ensure full coverage of the
treatment area.
• For Single-Flash Mode, press the Flash Button each time you move to the next area.
• Store the unused attachment in a safe location (such as in the packaging) taking care not to damage
the Flash Window and other components.
• The i-LIGHT® is equipped with two operating modes: Single Flash Mode and Multi-Flash Mode.
Your i-LIGHT® device will automatically be set to Single Flash Mode each time the device is powered ON.
• Single Flash Mode: The i-LIGHT® will
each
time
the
Flash Button is pressed. This mode is ideal for
precision treatments of the face and small areas.
• Multi-Flash Mode: The i-LIGHT® device will
when the Flash Button is pressed and will continue to
,
How to treat:
•
,
NOTE: When the Skin Contact Sensors are fully engaged you will hear a ‘chirp’ and the Bulb Status
Indicator Display will illuminate green.
2
3 Move to the next area and treat in a grid like pattern to ensure full coverage of the treatment area.
• For Single-Flash Mode, press the Flash Button each time you move to the next area.
• For Multi-Flash Mode, keep your
on the Flash Button to keep it depressed and glide to the next
automatically after 3 seconds.
,
NOTE: During Multi-Flash Mode if you let go of the Flash Button or lose skin contact, simply resume
treatment by repeating the above steps.
,
Facial Treatment (female use only)
•
sensitive and more likely to be exposed to the sun’s UV rays; therefore treating
unwanted facial hair is
to treating the body – please be sure to read
the
Warnings and Safety Precautions carefully before beginning a facial treatment.
,
IMPORTANT: The Facial Attachment has been specially designed to treat the unique
characteristics of female facial hair. DO NOT use the Body Attachment on the face.
See section ‘Changing Attachments’ for more information.
Fig. 9
Fig. 10
Fig 16
