5
E
Tips for best results
•
Always hold the shaver at right angles to the skin so that all foils are
touching the skin with equal pressure.
•
Use moderate to slow stroking movements. The use of short linear motions
in stubborn areas may obtain a closer shave, especially along the neck and
chin line.
•
DO NOT press hard against the skin in order to avoid irritation and damage
to the foil heads.
C
CLEANING AND MAINTENANCE
• To ensure long lasting performance clean after each use.
• Ensure the appliance is switched off and unplugged from the mains.
• The easiest and most hygienic way to clean the appliance is by rinsing the
appliance head after use with warm water.
,
DRY CLEANING
•
Pull the foil assembly up to remove from the hair pocket.
Gently tap out the excess hair shavings and use a cleaning brush to clean
out the hair pocket if necessary.
Note: Do not use a brush to clean the shaving foils.
Replace the head assembly.
,
WASHABLE CLEANING
•
Pull the foil assembly up to remove from the hair pocket.
•
Do not use the brush to clean the foils but blow the shavings out or rinse in
running water.
•
Use the cleaning brush to sweep any loose hairs from the cutter and
trimmer. Rinse in running water.
•
Replace the head assembly.
•
Lubricate the teeth of the trimmer every six weeks with a drop of sewing
machine oil.
,
REPLACING THE FOILS & CUTTERS
•
To ensure continued high quality performance from your shaver, we
recommend the foils and cutters are replaced regularly.
,
Signs that your foil/s and cutter/s need replacing
•
Irritation: as foils get worn, you may experience skin irritation.
•
Pulling: as the cutters wear, your shave may not feel as close and you may
feel the cutter pulling your hair.
