6
•
Wear through: you may notice that the cutters have worn through the foils.
,
TO REPLACE THE FOIL
•
Pull the foil assembly up to remove from the hair pocket.
•
Insert the new foil assembly on the hair pocket, press down and click into
place.
,
REPLACING THE CUTTERS
•
Grasp the cutter between your thumb and forefinger and pull upwards.
•
Snap the new cutter into the oscillator tip.
,
Note: DO NOT press on the cutter ends as this may cause damage.
•
Foil and cutters replacement model: SP290
BATTERY REMOVAL
•
The battery must be removed from the appliance before it is scrapped.
•
The appliance must be disconnected from the supply mains when removing
the battery.
•
Using a small screwdriver, pry off the 2 side panels.
•
Remove and open the core from the shaver to expose the batteries.
•
Cut the wires connecting the batteries to the circuit board and remove the
batteries.
•
Dispose of the batteries safely.
H
ENVIRONMENTAL PROTECTION
To avoid environmental and health problems due to hazardous
substances in electrical and electronic goods, appliances marked with this
symbol must not be disposed of with unsorted municipal waste, but
recovered, reused or recycled.
E
SERVICE AND GUARANTEE
Defects affecting product functionality appearing within the guarantee period will
be corrected by replacement or repair at our option provided the product is used
and maintained in accordance with the instructions.
Your statutory rights are not affected.
Consumables are excluded.
Defects from repair by an unauthorized dealer are not covered.
