18
Using
D. Control the Remote Viewer
To do this...
Do this...
Switch between RVs
Momentarily press
Standby
button .
Resume operation from Standby
Momentarily press
Standby
button to select RV.
Reduce RV power consumption
when video isn’t needed
Press and hold
Standby
button
(about 3
seconds) until
Standby
indicator is on (places
both RVs in Standby Mode).
Nudge RV about 10°
While RV is not rotating, momentarily press a
Direction
button
or .
Nudge RV about 30°
While RV is not rotating, press and hold (about 2
seconds) a
Direction
button
or .
Start continuous rotation
Momentarily press
Rotation On/Off
button
.
(Rotation will be in last direction in which RV was
nudged.)
Stop continuous rotation or scan
Momentarily press
Rotation On/Off
button
or either
Direction
button
.
Turn illumination on or off
Momentarily press
Illumination
button
until
indicator shows desired state.
Set illumination to auto
Press and hold
Illumination
button
until
Auto
indicator turns on.
Mute or hear audio
Press
Mute
button
.
Adjust audio volume
Press – or +
Volume
button
.
Adjust video contrast
Press – or +
Contrast
button
.
Adjust video brightness
Press – or +
Brightness
button
.
Zoom in or out
Press
Zoom
button
.
Flip display vertically
Press
Flip
button
.
Turn off display to conserve
power
Press and hold
Flip
button
for 5 seconds.
Turn on display
Press and hold
Flip
button
for 1 second.
Turn off PDU and place RVs in
standby
Press
Power
button
.
Change channel to optimize
video/audio or avoid interfering
with another device
Press
Channel
button
(there are 4 channels).
