17
Using
Note:
The RV is not a breaching tool.
Note:
Do not start rotation while the RV is in motion, as this
could damage the rotation mechanism. Wait until the RV is
in position to begin rotation.
Lower the RV into position.
See “Lowering Wire Adapter” on page 20.
Raise the RV into position.
See “Telescoping Pole” on page 20.
9. When the RV is in position, observe the video on the PDU. If you think the RV is
not upright, rotate it using the
Rotation On/Off
button
. Rotating should
help the RV to roll onto its base.
C. Optimize video reception
If video from a selected RV is poor or not present:
Reorient the video antenna (on the right side of the PDU).
Move the PDU to a different location to minimize the effects of walls, floors,
vehicles and other obstructions.
Move the PDU closer to the selected RV.