![background image](http://html.mh-extra.com/html/remington/eye-ball-r1/eye-ball-r1_owners-manual_1438535017.webp)
15
Using
B. Deploy the Remote Viewer
1. Remove the Remote Viewer (RV) and the Personal Display Unit (PDU) from their
carrying case.
2. Turn on the PDU: press and hold the
Power
button
(in the upper left
corner) for about 2 seconds.
3.
Rotate the PDU antennas into the
approximate positions shown at right.
Notice that the antennas are
not parallel
.
Note:
Leaving the antennas folded
along the PDU sides drastically
reduces operating range.
4. Turn on
one
of the RVs: remove the Pull Pin from
the rear of the RV. The RV initializes, during which:
Illumination LEDs turn on constantly or flash
(flashing indicates battery is nearly depleted,
and will power the RV for about ½ hour or less).
RV transmits video and audio for about
2 seconds.
RV rotates right, then left.
RV enters Standby mode.
5. Repeat step 4 for the other RV.
6. Press the
Standby
button
once or twice to display video from the RV.
7. Verify that the PDU is receiving video from the RV.
continued
Charging Jack
Pull Pin