![background image](http://html.mh-extra.com/html/remington/colourcut-hc5035au/colourcut-hc5035au_use-and-care-manual_1437208005.webp)
5
HC5035 SPECIFICATIONS
Power System
Corded
Voltage Type
Single 220 - 240V
HOW TO USE
Before Starting to Cut
•
Inspect the clipper making sure that it is free from hair and dirt.
•
Seat the person so that their head is approximately at your eye level.
•
Before cutting, always comb the hair so it is tangle free and dry.
To Attach a Comb
1.
Hold the comb with its teeth upward.
2.
Slide it onto and along the clipper blade until the front of the comb
firmly sits against the clipper and click into position.
3.
To remove, holding the clipper with the blades facing away from you,
firmly push the comb upward and away from the blades.
Comb Settings
•
Each comb attachment is marked accordingly on its outside middle
surface.
•
Please note a 0.5mm cutting length can be achieved from holding the
clipper, with no comb attachment, perpendicular to the skin. A 1.0mm
cutting length is achieved from holding the clipper.
•
This is with the taper setting set at the closest gap between the
blades.