background image

8.  In order to claim under the warranty granted under clause 3 you must: 

(a) Retain this warranty with your receipt/proof of purchase; and 
(b) Return the Goods to us at the relevant address below or to the Supplier by prepaid freight 
within the Warranty Period accompanied with (i) the legible and unmodified original proof 
of purchase, which clearly indicates the name and address of the Supplier, the date and 
place of purchase, the product name or other product serial number and (ii) this warranty.

9.  This warranty is immediately void if: 

(a) Any serial number or appliance plate is removed or defaced; 
(b) The Goods have been serviced or otherwise repaired by a person not 
authorised to do so by us or where non approved replaced parts are used.

10.  The Goods are designed for domestic use only. A limited 90-day Warranty applies to 

any industrial or commercial use of the Goods. The Goods must be connected to the 
electrical voltage requirements as specified in the ratings label located on the Goods.

11.  This warranty does not cover the cost of claiming under the warranty 

or transport of the Goods to and from the Supplier or us.

12.  This warranty is only valid and enforceable in Australia against Spectrum Brands 

Australia Pty Ltd and in New Zealand against Spectrum Brands New Zealand Limited.

Contact us or the Supplier for further details.

Spectrum Brands Australia Pty Ltd

Locked Bag 3004 
Braeside, VIC 3195 
AUSTRALIA 
Customer service in Australia: 1800 623 118 
E-mail: [email protected] 
Website: www.remington-products.com.au

Spectrum Brands New Zealand Limited

PO Box 9817 
Newmarket, Auckland 1149 
NEW ZEALAND 
Customer service in New Zealand: 0800 736 776 
E-mail: [email protected] 
Website: www.remington.co.nz

REMINGTON SERVICE HOTLINE

Australia 1800 623 118 (toll free) 

New Zealand 0800 736 776 (toll free)

® Registered Trade Mark of Spectrum Brands Inc., or one of its subsidiaries 
Made in China to the Specifications of Spectrum Brands, Inc. 
©2020 Spectrum Brands Inc. 
Rev. 07/20 
Part No. T22-7001473 
Type: HC06A

10

Summary of Contents for COLOURCUT HC5035AU











Reviews: