6
HOW TO CHANGE THE BRUSHES
Your Big Styles 2 in 1 comes with a 38mm and a 50mm brush, both
with protective covers.
Before using remove the protective covers from the brushes.
To attach the brush, simply place it over the top of the hot air styler tip,
centring and pushing gently towards the handle until it clicks into place.
To remove the brush, push the release button on the top of the brush
attachment and pull away from the body of the hot air styler.
NoTe: The brush sleeve attachments will become hot during use. Allow
the attachment to cool before removing. Always make sure that the unit
is turned off and unplugged before attaching or removing the brushes.
HOW TO USE YOUR REMINGTON® BIG STYLES 2 IN 1
Select the size brush that you wish to use and attach as above. Plug
the unit into a household (230/240V AC) power outlet. Your Big Styles
is ready to use when you switch to the first heat/speed setting. The Big
Styles has 2 heat/speed settings and a cool shot.
Styling your hair will be faster if the hair is damp but not soaking wet.
When drying/styling avoid covering the air inlet with your hand.
Section your hair and make sure it is smooth and tangle free before
beginning to style and dry. For best results, experiment with different
size sections of hair to determine the style that you would prefer. A
large section of hair will give a soft wave, a small section of hair will
give a more defined wave.
The swivel cord ensures ease of use preventing the cord from getting
tangled when twirling the unit around your hair.
Take a section of hair and drape it either over the brush or under the
brush, depending on whether you wish to create a bob or flipped out
style. Switch to the appropriate heat/speed setting. We recommend that
you start with the low heat/speed setting until you become familiar with
the action of the brush. Move the brush through the hair section
towards the end of the hair. When you have reached the end of the
