Remii 102745-XT, Assembly, Installation And Operation Instructions

Page: 23 / 25

23
TROUBLE SHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION
Dim or no flame Flame LED ’ s are burnt out Inspect t he LED ’ s and replace t hem if
necessary.
Ember bed is not
glow ing or dimming
Ember LED
’
s are burnt out Inspect t he ember bed LED
’
s and
replace t hem if necessary.
Appliance has overheated and
safet y device has caused t he
t hermal sw it ch t o disconnect
Turn off t he main sw it ch, allow
appliance t o cool for 10 minut es, t hen
t urn it on.
House circuit breaker has
t ripped
Reset house circuit breaker.
Appliance t urns off and
w ill not t urn on
Appliance
’
s fuse has blow n Replace t he fuse.
Appliance is not plugged int o an
elect rical out let
Check plug and plug in.
Appliance has overheated and
safet y device has caused t he
t hermal sw it ch t o disconnect
Turn off t he main sw it ch, allow
appliance t o cool for 10 minut es, t hen
t urn it on.
Appliance w ill not come
on w hen sw it ch is
flipped to ON
Circuit board is burnt out Inspect t he circuit board and replace
it if necessary.
No warm air coming out
of appliance
Heat er is burnt out Inspect t he burner and heat er
assembly and replace it if necessary.
Flame sputt ers Flame motor is defect ive. Call a qualified service technician and
replace flame motor.
Remot e Cont rol does
not work.
Low bat teries.
Unit sw it ch in
“
O
”
posit ion.
Replace AAA batt eries in remot e
cont rol.
Turn t he sw it ch in “ I ” posit ion.
Flame is fixed. W iring may be loose or t he
flame mot or may be defect ive.