V) Auxiliary Cable
The auxiliary function will only be supported when the Auxiliary Cable has a suitable sound source
applied via a suitable connection cable.
1) Press the “AUX Music” button on the top panel and the unit will
be in AUX music mode
2) Turn your auxiliary source "On" and operate as usual. The sound
from the auxiliary source will be heard through the speakers.
3) Adjust the Volume level controls of this unit as desired.
VI) Maximum Volume Control
This unit comes with a Volume Limit Switch located under the unit
(
Inside the Battery Compartment).
The limit options are 50%, 75% and 100%. Default setting is 75%. Simply slide the switch to the desire
level to limit or increase the percentage of the total volume output.
VII) Display Brightness Control
The display brightness can be set at 4 different levels and can be changed by pressing the SNOOZE
button at anytime and in any mode.
VIII) Daylight Saving Control
Daylight Saving Control is located under the unit (inside battery compartment). Slide the switch to
control the Daylight Saving function ON or OFF.
IX) Single Day Alarm Control
Single Day Alarm Control is located under the unit (inside battery compartment). Slide the switch to
ON Position to activate the Single Day Alarm and slide the switch to OFF to deactivate the Single Day
Alarm Function
X) 12/24 Hour Clock Display
12 Hour and 24 Hour Clock display can be selected via the 12/24 Clock Display switch under the unit
(inside battery compartment). Slide the switch to your desire display option.
XI) Resetting
If the unit does not work properly, you may have experienced an electrostatic discharge or
a power surge that caused the internal computer to lock up (crash). If this occurs, simply
disconnect the unit from the power source and re-connect the power again after one
minute.
Note: Although disconnecting the power will unlock the internal computer after a power
surge, it will also erase all of the settings.
