1) Connect your Apple device (iPod/iPhone or iPad) to the original USB cable (not included) to the
iPad USB Port (Play and Charge iPhone/iPad/iPod) on the side of the unit. The Apple device will start
charging.
2)
Press the “USB Music” button on the top panel. The Apple device
will start automatic playback of music.
3) Press the “Rotate & Select” button to control the “Play/Pause” of the music payback. You can also
go to the next song by turning the “Rotate & Select” knob clockwise and go to the previous song by
turning the “Rotate & Select” knob counter clockwise.
4) Rotate the “Volume” knob to adjust the volume to the desired listening level.
V). Listen to Radio
Note: Extend the FM antenna to its full length. It may be necessary to adjust the direction
of this wire antenna until you find the best position of reception for your favorite FM
stations.
1)
Press the “Radio On/Off” button on the top panel to switch on the
FM Radio Function.
2.) FM frequency will show in the display at FM mode and AM
frequency will show in the display at AM mode.
3) Tune to the desired station:
a) Automatic Tuning
Press and hold the “SnoozeDimmer/Hold to Seek” button on the top panel. Auto tuning will start.
b) Manual Tuning
Turn the “Rotate & Select” knob on the top panel until the desired station appears on the display. The
frequency will go from low to high when turning the knob in clockwise direction. The frequency will
go from high to low when turning the knob in counter-clockwise direction.
