4.4.2
Meaning of the symbols on the display
Tab.11 Symbols on the display
Information menu: Read out various current values.
Chimney-sweeping position: Forced high or low load for O
2
/CO
2
measurement.
User menu: Parameters at user level can be changed.
Central heating function off: The heating function is deactivated.
Manual mode: Boiler is set to manual mode.
DHW function off: The DHW function is switched off.
Service menu: Parameters at installer level can be changed.
ECO setting: The economy setting is activated.
Fault: Boiler indicates a fault. This can be seen from the code and red display.
Frost protection: Boiler is running in frost protection mode.
Hour counter menu: Read out the operating hours, number of successful starts and hours on mains supply.
On/off switch: After 5 lockouts, the boiler must be switched off/on again.
Circulating pump: The pump is running.
CH function: Access to CH temperature parameter.
DHW function: Access to DHW temperature parameter.
Yellow display with the symbols: +
+ (maintenance message).
Water pressure: The water pressure is too low.
Battery symbol: Status of battery in wireless controller.
Signal strength symbol: Signal strength of the wireless controller.
Burner level: Boiler is running at full or part load.
Key lockout: Key lockout is activated.
4.5
Standard delivery
The delivery includes:
The boiler, with mains lead
Suspension bracket and fasteners for wall mounting
Mounting template
Connection cable for pump (Quinta Pro 30 - 45 - 55 - 65 - 90 - 115)
Documentation
This manual only deals with the standard scope of supply. For the installa
tion or mounting of any accessories delivered with the boiler, refer to the
corresponding mounting instructions.
4.6
Accessories and options
Various accessories can be obtained for the boiler.
Important
Contact us for more information.
4 Description of the product
20
123157 - v.12 - 07022018
