46
Connection of Blocks
Th e block connection is performed according to the fi gure below. When connecting the blocks follow the chapter "Connection of the Unit’s Sec-
tions (see page 7, pictures 9 a 10).
Filter Replacement
Filter inserts are inserted into the guiding rails. When replacing the fi lter inserts, make sure they are properly and fully inserted.
Compact version of Air-Handling Units
Figure 1
– inner block connection detail
Figure 2
– Replacement of fi lter inserts
Figure 3
– Replacement of fi lter inserts
DIMENSIONS AND NUMBERS OF FILTER INSERTS
Filter size
Filtration class
Filter dimensions
Numbers of fi ltration inserts
Kit designation
XP 04
G4, F5
544 x 247 x 98
2
XPNMC 04xx **
XP 04
F7 *
544 x 492 x 98
1
XPNMC 0407
XP 06
G4, F5, F7 *
347 x 642 x 98
2
XPNMC 06xx
XP 10
G4, F5, F7 *
427 x 399 x 98
4
XPNMC 10xx
* Th e F7 fi ltration class fi ltration insert can only be used for XPHOC internal assembly.
** Th e required fi ltration class must be specifi ed aft er the mark xx
Connection of the fi ltration chamber
Upper connection of blocks
Central connection of blocks
Lower connection of blocks
Connection of base frames
