End
Fig. 4
Inner Board
AUDIO
Audio output for connection to audio equipment
OPTIONAL PART -
AVA-258
Audio Cable
AUDIO
GN
L
R
PROGRAMMING FOR PROJECTOR
Initialization:
1) Press the MIC ON/OFF and PC button at the same time to enter programming mode.
MIC ON/OFF and
Projector ON/OFF indicator lights will turn on.
2) Enter password
2215
, a long beep will sound indicate ready for programming mode. Key in projector assigned code as
listed below (Example: for Panasonic Projector
2215
,
long beep
,
3 4
).
means programming is successful.
Once done, 2 short beeps will sound that
Projector Assigned Code Listing
1 1 3M X series, Hitachi
1 2 3M DX series, Hitachi
1 3 Acer
1 4 BenQ, HP
1 5 BenQ 7 series
1 6 Canon SX6 series
1 7 Dell
For Projector Brand not listed above, please use spare “user programmable code.”
3 1 NEC
3 2 Optoma EP757
3 3 Optoma 759
3 4 Panasonic
3 5 PLUS
3 6 Proxima
3 7 Sanyo
2 1 Epson current models
2 2 Epson older models
2 3 Fujitsu
2 4 Geha Compact 218
2 5 Geha Compact 288
2 6 Infocus
2 7 Mitsubishi
4 1 Sharp
4 2 Sony Ex series
4 3 Sony CX/FX/PX series
4 4 Toshiba
4 5 Viewsonic 558 series
4 6 Viewsonic 559 series
4 7 Geha Compact 228
7 1 User Programmable
7 2 User Programmable
* If communication fail, it may due to
1. F
RS-232 connector, it will work.
eedback loop waiting for acknowledgment. Remove “RX” pin on the MIC-800
Fig. 3
Inner Board
Application
VIDEO
VGA
RS-232
Video outputs and controls for connection to visual/audio equipments
Item
VD GN
R G B H V
GN GN GN
RX TX GN
VIDEO
VGA
RS-232
OPTIONAL PART -
AVA-255
3-in-1
Video, VGA
& RS-232 Cable
* Press 3737 to enter programming mode. A long beep will sound ready for programming mode. Connect MIC-800
* Programming software (T Series software) can be download from Remaco Website to program the MIC. You will need
your projector protocol to program the MIC.
2. Projector RX/TX pin may connect wrongly, swap the RX/TX pin and it will work.
Remarks
* The 2 empty memories (7 1 and 7 2) are for programming projectors not found in the list.
RS-232 to computer RS-232 port (If RS-232 port is not available in computer, “ USB to RS-232 Converter ” can be used).
