ENGLISH
2
CAUTION! For your own safety, please read this operation manual carefully before initial operation! All persons involved in the installation, setting-up, operation,
maintenance and service of this device must be appropriately qualified and observe this operation manual in detail. This product complies with the requirements of
the applicable European and national regulations. Conformity has been proven. The respective statements and documents are deposited at the manufacturer.
Congratulations on purchasing your Reloop MOVE 15 SUB speaker. Thank you for placing your trust in our technology. Before operating this equipment we ask you to carefully study and
observe all instructions.
Please remove the Reloop MOVE 15 SUB from their packaging. Check before initial operation to make sure that the device has not been visibly damaged during transport. If you detect any
damage to the power cable or the casing, do not operate the device. Contact your specialised dealer.
SAFETY INSTRUCTIONS
CAUTION! Please exercise particular caution when handling 230 V power voltage. This voltage rating may lead to a critical electrical shock! Any damage caused by the
non-observance of this operation manual excludes any warranty claims. The manufacturer is not liable for any damage to property or for personal injury caused by im-
proper handling or non-observance of the safety instructions.
- This device left the works in perfect condition. To maintain this condition and to ensure a
risk-free operation the user must observe the safety instructions and warnings contained
in this operation manual.
- For reasons of safety and certification (CE) the unauthorised conversion and/or modification
of the device is prohibited. Please note that in the event of damage caused by the manual
modification to this device any warranty claims are excluded.
- The Fuse (14) must exclusively be exchanged against fuses of the same class, with the
same trigger features and nominal current rating.
- The inside of the device does not contain any parts which require maintenance, with the
exception of wear parts that can be exchanged from the outside. Qualified staff must carry
out maintenance, otherwise the warranty does not apply!
- Ensure that the power supply is only activated following the complete installation of the
device and wiring of all connections. Always plug in the mains plug last. Ensure that the
mains switch is in the "O" position when connecting the device to power.
- Only use cables that comply with regulations. Observe that all jacks and bushes are tighte-
ned and correctly hooked up. Refer to your dealer if you have any questions.
- Ensure that when setting up the product the mains cable is not pinched or damaged by
sharp edges.
- Prevent the mains cable from coming into contact with other cables! Exercise great care
when handling mains cables and connections. Never touch these parts with wet hands!
- Connect the power cable exclusively to appropriate outlets. The only supply point to be used
is a supply outlet in accordance with specifications of the public supply network.
- Disconnect the device from the supply outlet when not in use and before cleaning! Be sure
to hold the mains plug by the body. Never pull the mains cord!
- Position the device on a horizontal and stable low-flame base.
- Avoid any concussions or violent impact when installing or operating the device.
- When selecting the location of installation make sure that the device is not exposed to ex-
cessive heat, humidity, and dust. Be sure that no cables lie around openly. You will endanger
your own safety and that of others!
- Do not rest any containers filled with liquid that could easily spill onto the device or in its
immediate vicinity. If, however, fluids should access the inside of the device, immediately
disconnect the mains plug. Have the device checked by a qualified service technician before
re-use. Damage caused by fluids inside the device is excluded from warranty.
- Do not operate the device under extremely hot (in excess of 45° C) or extremely cold (below
5° C) conditions. Keep the device away from direct exposure to the sun and heat sources
such as radiators, ovens, etc. (even during transport in a closed vehicle). Always ensure
sufficient ventilation.
- The limit value for relative humidity is 50% at 45°C.
- The product must be operated and stored in a dry environment only! Splash water, rain,
humidity, fog may reduce the protective insulation which may lead to fatal electric shocks!
- A minimum distance of 1,5 m to a fog machine must be observed; fog saturation in the
room must not reduce the visibility to below 10 m.
- The device must not be operated after being taken from a cold environment into a warm
environment. The condensation caused hereby may destroy your device. Do not switch on
or operate the device until it has reached ambient temperature!
- Controls and switches should never be treated with spray-on cleaning agents and lubri-
cants. This device should only be cleaned with a damp cloth. Never use solvents or cleaning
fluids with a petroleum base for cleaning.
- When relocating the device should be transported in its original packaging.
- Devices supplied by voltage should not be left in the hands of children. Please exercise
particular care when in the presence of children.
- At commercial facilities the regulations for the prevention of accidents as stipulated by the
association of professional associations must be observed.
- At schools, training facilities, hobby and self-help workshops the operation of the device
must be monitored with responsibility by trained staff.
- Keep this operation manual in a safe place for later reference in the event of questions or
problems.
APPLICATION IN ACCORDANCE WITH REGULATIONS
- This device is an active loudspeaker system which amplifies and plays low level audio
signals by hooking up an amplified audio source.
- This product is authorised for connection to 230 V, 50 Hz and 115 V, 60 Hz AC and is
designed exclusively for indoor application.
- If the device is used for any other purposes than those described in the operation manual,
damage can be caused to the product, leading to exclusion of warranty rights.
Moreover, any other application that does not comply with the specified purpose harbours
risks such as short circuit, fire, electric shock, etc.
- The serial number determined by the manufacturer must never be removed to uphold the
warranty rights.
INSTALLATION
ATTENTION!
DANGER!
Should your Reloop MOVE 15 SUB shows any sign of damage, do not suspend the device! In this case, have your Reloop MOVE 15 SUB repaired by your specialised Reloop dealer.
- Reloop does not accept responsibility or liability for damage to property or personal injury
resulting from an improperly suspended installation of the Reloop MOVE 15 SUB!
- The device must be installed vertically on an absolutely planar, firm, fireproof, shock- and
vibration-free surface.
- Choose a location which ensures sufficient ventilation of air. Long-term overheating may
damage the integrated final amplifier.
- The installation of this device must be carried out by trained and professional staff only!
- The subwoofer must never be hugn in a suspended installation. Danger of life due to falling
speakers.
- Observe the regulations if the product is used for commercial operation. Consider the EN
60589-2-17.
- It must be ensured that an expert inspects the mechanical and safety-relevant installation
at least once a year.
- It must be ensured that an expert inspects the mechanical installation and the installation
of relevance to safety within the framework of an acceptance test at least every four years.
- The installation fixture must be as such that it can withstand 10 times the load capacity
without harmful deformation for a period of 60 minutes.
- It is prohibited for any individual to unnecessarily stay or pass beneath the installation during
any type of assembly work.
