Reloop iPhono 2, Instruction Manual

Page: 16 / 28

ENGLISH
16
NoTe! If a cD player with a very high output is used, the input recording level can exceed 1V rms, this
will result in slight digital noise and distortion. And the LED will turn from green to orange. To find
the correct signal location rotate the Gain Dial -3- counterclockwise until the LeD returns to green.
TechNIcAL INFoRMATIoN
Global Distribution GmbH GmbH did not test the following manufacturers’ specification for plausibility
and accuracy:
Inputs: Phono 5 mV/47 kOhm +1/-3dB
Line 200 mV/10 kOhm +1/-2dB
Outputs: Master Normal 0.77V / 600 Ohm
Headphones Normal 1.1V / 32 Ohm
Frequency range: 20 Hz - 20KHz, +/-1 dB (RIAA +/- 3 dB)
Distortion: > 0.1 %
Stereo separation: < 65 dB
S/N ratio: Phono 70 dB
Line 75 dB
USB: A/D & D/A converter 16 bit
Interface USB 1.1 or USB 2.0 with FullDuplex support
Power supply: 5 V DC
Dimensions: 80 x 74 x 33 mm
Weight: 0.094 kg (without mains adapter)
hAVe FUN WITh yoUR ReLooP!
Reloop - Solution for DJs
Global Distribution GmbH
Schuckertstraße 28
48153 Muenster
Germany
Fax +49.251.6099368
www.reloop.com