This manual contains instructions for using the PM4500
Programmer (simply referred to as the Programmer) to
program the Mini-Corn@ Plus 16 and 99 Channel SM
Series Transceivers.
The Programmer has a non-volatile memory that requires
no battery to maintain data.
The Programmer is used for:
1. Assigning to the Transceiver the following Options
or Configuration Parameters:
n
Transmit Time-Out Timer
n
Scan Delay
n
Priority Delay
n
Key Pad Beep
n
Channel 1 Beep
n
Off Hook to Prioriiy Channel
n
Off Hook Scan
n
Power Up on Channel 1
n
TX Carrier Delay
n
Message Annunciator
n
Talk Around
n
Range
2. Assigning to each channel the following parameters:
Receive Frequency
n
Busy Channel Lockout (BCL)
n
RX’ Tone, DCS’ Code or External Decoder
n
Transmit Frequency
n
TX’ Tone, DCS’ Code or External Encoder
3. Cloning:
n
Transferring data
from
the Transceiver to the
Programmer
n
Transferring data
from
the Programmer
the
Transceiver (Write Operation)
‘DCS stands for Digital Coded Squelch
RX stands for Receive: TX stands for Transmit
The Programmer contains a keyboard (see Figure
below) with 20 keys arranged in a 4 x 5 matrix. A
character LCD* display lights up when power is
applied.
All Programming and Cloning information is indicated
on the Programmer’s LCD display.
The Unit operates on 12VDC power from the Trans-
ceiver. Data between the Programmer and the Trans-
ceiver is transferred through a modular plug connected
to the Microphone jack on the Transceiver.
*LCD stands for Liquid Crystal Display
C H A N N E L
OPTIONS 4
m
m
SIMPLEX
C L O N E
ESCAPE TOGGLE
C H A N N E L A
DELETE
ENTER
KEYBOARD
