2
Reliant
|
Quick Start Guide
| Video Camera
Quick Start Guide
| Video Camera
3
Reliant
|
Model ADC V520/ADC V520IR
Model ADC V620PT
Step 2: Synching your camera with the network
Log into the
Reliant Connect
web portal at reliant.com/
connectlogin, click
Video
>
Video Device Settings
>
Add Video
Device
and follow the instructions in the EZInstall
™
Camera
Setup Wizard.
Your Wi-Fi-enabled video camera gives you the
peace of mind of a live video feed of your home,
accessible from your mobile device. Use this guide
to install your camera and add it to your system for
full network accessibility.
Step 3: Installing your camera
1
After adding the camera to your network,
disconnect your video camera from the
Ethernet cable.
Questions?
Visit support at
reliant.com/connectsupport
or
give us a call at
1.844.295.5556
Get the whole picture from
anywhere, anytime.
Connect the video camera to your Internet router with the
supplied Ethernet cable, and then plug it into a power source.
2
Place your camera on a flat surface in the
desired location or mount it using the
manufacturer’s instructions that came with
your camera, and plug it in.
Place the camera within ample reach of an
electrical outlet so that the power cord doesn’t
cause the camera to move on its mount.
To finish the set-up process
, including
detailed instructions, optimizing camera
settings and setting up recording
schedules, log into the Reliant Connect
web portal at www.reliant.com/
connectlogin.
Step 1: Adding your camera to the network
NOTE: The Ethernet cable must be connected to the camera before power
is connected.
