Reliable UBERLIGHT 2000TL, Instruction Manual

Page: 6 / 20

03
IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
When using your UberLight, basic safety precautions should always be followed.
Please read the following instructions carefully as they provide important
information concerning how to install, use and care for this product.
INSTALLATION INSTRUCTIONS FOR 2000TL
THE 2000TL CAN BE USED WITH OUR WITHOUT THE SUPPLIED CLAMP
If you would like to use it without the clamp, unscrew the 4 screws that attach the
clamp, and place the base where you would like to mount the light. Using 4 longer
screws (not supplied), attach the base to the surface.
To use the 2000TL with the provided clamp, unwind the clamp to the desired width,
place over a hard surface and tighten so it is secure.
TECHNICAL DATA
Voltage: 110V/220V ~ 60Hz
Working Power: 2W
* For 220V usage a 220V plug is required (not supplied).
To set the light at different positions - bend any part of the “FLEXIBLE NECK” to
move it. Never apply force to the “LAMP HEAD” to redirect the light. The “LAMP
HEAD” can be gently adjusted downward from the “standard position” by 90
degrees and side-to-side by 180 degrees.
FLEXIBLE NECK
LAMP HEAD
(standard position)
IMPORTANT