3. Extension Rod Installation:
- When it is necessary to clean high, hard to reach places or mopping the floor,
install the extension rod.
- Align the extension rod with the head of the machine, push it into place and
gently rotate the extension rod firmly on the unit until it clicks into place
(figure 3).
4. Mop Head Installation:
- In the same way, the mop head can be connected with the extension rod, and
the extension rod can be connected with the nozzle. Gently twist and click
into place (figure 4).
3.
4.
3. Wall Bracket Installation:
- Align the wall bracket where you would
like it placed on your wall using a level.
Mark placement using a pencil.
- Using a Phillips head screwdriver, screw
the wall mount directly into drywall. If you
have inserted an anchor, insert the screw
through the wall mount and into the plastic
anchors.
- Turn clockwise until there is a firm
resistance.
NOTE: If you are screwing your bracket into a
wall with studs, drill a whole in the drywall
that is roughly the same diameter as the
anchor. Insert the anchor into the hole until it
is flush with the wall.
9
