The appliance will start at
eco
mode after plug-in,
touch the
temp
button to switch to other ironing
temperature
s
and select your desired temperature to
begin
. A “Beep” sound will be heard when the function
button is being touched.
Depending on which temperature setting that you have
selected, the corresponding temperature symbol on the
control panel will be flashing. When the iron is ready for
use, the temperature symbol stops flashing and stays on
steadily.
Important note: The first time you use the iron, the
pump will take a few seconds to generate steam. During
this time, you may hear a “pumping” sound. This is
normal and will occur before the iron is ready to use.
Steam ironing is available for all temperature settings
except ‘Dot 1’. You can press and hold the steam trigger
to generate steam for steam ironing. A beep will be heard
when the steam trigger is pressed and the respective
steam indicator for ‘Auto Mode’, ‘Dot 2’, ‘Dot 3’ and ‘Max’
will flash, indicating it is generating steam. Release the
steam trigger to stop generating steam.
Adjust the temperature setting of the appliance
by pressing the
temp
button.
After use, Touch and hold the
temp
button for 4
seconds to shut off the power. Auto Shut off/shut
off Indicator flashes during this period.
After every use, follow the instructions in “Draining the
water tank”.It is recommended to drain the water inside
water tank after use.
PROGRAMMED TEMPERATURE
1
5
Summary of Contents for MAVEN 140IS
Page 2: ...01 ...
Page 3: ...01 THE MAVEN 140IS HOME IRON STATION INSTRUCTION MANUAL ENGLISH ...
Page 5: ...03 ...
Page 10: ...08 ...