FIGURE 16
1.
When the self-clean indicator lights up with a beep, it
indicates that the appliance needs to undergo a self-
cleaning (Figure 17).
2.
Fill the water tank to the max level (See ‘FILLING THE
WATER TANK’) and plug in the appliance.
3.
Press the function (temp) button followed by the steam
trigger and hold both buttons for 3 seconds. The
appliance will then enter self-cleaning mode with a beep
sound.
4.
Press the function (temp) to proceed with self-cleaning.
Press the steam trigger to resume ironing. (Note: when
self-cleaning is confirmed, you will not be able to
terminate it until the process is completed).
5.
Hold the iron about 15 centimeters above the sink in the
ironing position. Loose material and water will come out
through the steam holes (Figure 18). The appliance will
resume the previous ironing setting when this is
complete.
6.
Iron with a damp cloth to remove any deposits on the
soleplate. Remove any water stains that may have
formed on the soleplate.
7.
Press and hold the function (temp) button to turn the
appliance off and unplug from the main power supply
outlet.
FIGURE 17
FIGURE 18
Note:
If the anti-scale cartridge is not installed, or installed
incorrectly, you will not be able to use the appliance.
Note: If the prompt light appears a long time or does not
shut
off, remove the anti-scale cartridge when the product
is
powered on and reinstall the new anti-scale cartridge.
Unplug
the unit from power, press the steam button and plug the unit
back in. The symbol will then disappear.
SELF CLEANING
This function removes the scale and mineral build-up from the
steam chamber. The appliance will remain in the best condition
if this function is performed at least once a month or more
often, depending on the hardness of water used.
1
8
Summary of Contents for MAVEN 140IS
Page 2: ...01 ...
Page 3: ...01 THE MAVEN 140IS HOME IRON STATION INSTRUCTION MANUAL ENGLISH ...
Page 5: ...03 ...
Page 10: ...08 ...