9
Complete disassembly is not recommended. Return the unit to an authorized dealer for
total disassembly and/or repair.
All maintenance or disassembly should take place on a flat, clean work surface
covered with towels or wipers so as to have a clean space for the disassembled parts.
Inspect each part during disassembly for wear, scratches, and cuts. Discard the worn or damaged
parts and replace with new factory authorized parts.
See parts drawings on pg16-20.
O-rings are sensitive to sharp edges. Inspect closely for cuts or damage. A small cut will cause
a leak. When assembling or disassembling O-rings, use hydraulic
fl
uid as a lubricant to help
disassembly or installation.
When disposing of hydraulic parts or components observe all federal, state, and local guidelines.
IF YOU HAVE QUESTIONS REGARDING THE REPAIR AND MAINTENANCE
OF THIS TOOL CONTACT RELIABLE EQUIPMENT AT
800-966-3530
GENERAL MAINTENANCE
DAILY MAINTENANCE
The life, reliability, and safety of the tool is dependent on proper maintenance.
Clean and inspect all surfaces including head, latch mechanism, blade, ram, body and handles.
WARNING
blade, head and handles may cut or pinch. Please use extreme caution.
Worn or damaged parts (i.e. chipped or cracked blade) may malfunction during operation,
causing more extensive damge to the tool and/or severe injury to the operator or bystander..
All parts must be replaced with new parts if signs of wear or damage are evident.
Keep Label Set clean and legible. Replace decals when necessary.
BEFORE USING THIS PRODUCT
READ THE SAFETY WARNINGS
and recommended practices described
in the manual. Failure by the operator to
read and fully understand the warnings
will leave this person unquali
fi
ed to use
and operate the tool.
Failure to observe all warnings and instructions could result
in property damage, severe personal injury, and/or death.
R
WARNING
Hardened metals may fl y when severed
Take necessary precautions.
Wea
r
safety glasses do not cut live
conductors. Keep fingers away from
cutting blades and moving parts.
Secure latch before operating tool
Failure to secure latch can result in tool
damage and personal injury.
NOTE:
Warning, Caution, & Danger Labels
are now on a single label #
TMP4x1
Hardened Metals Label is #
20-CSL
Summary of Contents for REL-58MC
Page 2: ...2...
