9
OPERA
OPERA
OPERA
OPERA
OPERATION
TION
TION
TION
TION
Read entire manual prior to using this tool. (Refer to all safety recommendations and warnings)
Observe all safety precautions and procedures required by the operating company.
(
Refer to GENERAL SAFETY on previous page
)
Before cutting, ensure that material being cut is within the capacity listed for this tool.
Tool must be used in conjunction with a hydraulic system rated at, and adjusted to,
10,000 psi. Any system not operating at 10,000 psi may cause damage to the tool
and result in serious injury to the operator.
Connect the tool head to the control valve or hose set. (
Refer to warnings on page 6 & 7
)
Insert material to be cut between cutting and fixed blades.
The material to be cut MUST be at a 90
O
angle to the blade. This will ensure a proper cut with
minimal distortion. Severe blade damage may occur if material is cut at any other angle.
Operate pump or valve to slowly advance blade. If a hold feature is available, check
for proper alignment (
90
O
angle) of blade and material being cut.
Continue until cut is complete.
Double Acting:
Use the valve or pump to retract the cutting blade.
Single Acting:
Blade will return by internal spring.
Do not cut live conductors.
Hardened metals may fly when severed.
Take necessary precautions. wear safety glasses.
Keep all body parts away from cutting blades and moving parts.
WARNING
Failure to follow these rules can result in serious personal injury or death.
CA
CA
CA
CA
CAUTION
UTION
UTION
UTION
UTION
The information in this manual is intended to guide the user in the use
and application of this tool. It is not intended as a substitute for proper
training and experience in safe work practices for this type of equipment.
Consult your supervisor or safety personnel if you have any questions
regarding the application and safe operation of this tool.
If you have any questions regarding the information found in this manual please
contact
RELIABLE EQUIPMENT
before continuing.
Toll Free: 800-966-3530
Phone: 215-357-3500 Fax: 215-357-9193 E-Mail: [email protected]
NOTICE
Summary of Contents for HP4707 Series
Page 11: ...11 HP4704S PARTS DRAWING A A...
Page 12: ...12 D B B C C B B C C R P D D D A A...
