8
GENERAL SAFETY
GENERAL SAFETY
GENERAL SAFETY
GENERAL SAFETY
GENERAL SAFETY
USE ALL APPROPRIATE AND APPLICABLE PERSONAL SAFETY EQUIPMENT
as required
by the operating company.
ALWAYS INSPECT
TOOL
for wear or deterioration every day. Replace all parts that
show signs of wear or damage.
KEEP ALL PARTS OF THE BODY AWAY
from moving parts of the tool.
KEEP HANDS OUT FROM BETWEEN FIXED AND MOVING BLADES AT TOOL HEAD.
HANDS SHOULD BE OUTSIDE DANGER ZONE PRIOR TO ACTIVATING BLADE.
MAKE SURE
there is no person in close proximity to you or the tool who could be
injured by any operation being performed, tool malfunction or flying debris.
DO NOT OVEREXTEND
your position by overreaching or unbalancing the footing
necessary to maintain physical control of your body and the tool.
ALWAYS MAINTAIN A FIRM GRIP
on the tool to avoid loss of control during an
operation, causing property damage, serious injury or death.
USE THIS TOOL FOR THE MANUFACTURERS’ INTENDED PURPOSE ONLY.
OBSERVE CLOSELY ALL SAFETY RULES FOR A PARTICULAR JOB CLASS
FAILURE TO HEED THESE WARNINGS COULD RESULT IN
PROPERTY DAMAGE, SERIOUS PERSONAL INJURY OR DEATH.
ELECTRICAL SHOCK HAZARD
Always wear and use the necessary clothing, equipment and
safety practices to protect against electrical shock. Failure to
follow these rules can result in serious personal injury or death.
WARNING
WARNING
Operation/Safety
methods may vary in accordance
with the working guidelines established by each utility
or contractor.
For your own safety, ensure that you fully comply with
all safe operation guidelines required by your employer.
Summary of Contents for HP4707 Series
Page 11: ...11 HP4704S PARTS DRAWING A A...
Page 12: ...12 D B B C C B B C C R P D D D A A...