Parameters
FactorySetting
About
Digital Conference System
23
2) After entering the setting address state, all the indicator light on the
conference unit flashes, press any button except the chairman unit
priority key, the indicator light is off, the LCD screen shows "address is
set", the conference unit address is set successfully, The control panel
LCD displays the address of the currently set conference unit.
3) After all conference unit address is set, press "Exit" key to exit. The
conference central controller will automatically initialize and return to
level7 main menu interface after initialization.
5.6.5
System Parameters
Press up and down keys, switch to "4. System parameters", press "Enter"
key to enter the following interface:
Disp
Addr
0
Current Address
1) Press Up and Down keys to switch between "Factory Setting" and "About",
switch to "Factory Setting" and press "Enter" to enter the following
interface:
Factory settings
2) Press up and down keys to switch between "yes" and "no", switch to "yes",
press "Enter" key to restore the factory settings; switch to "no", press
"Enter" The system returns to the main menu.
Note:
After restoring the factory settings, when part of the new unit is added,
the conference central controller and the conference unit need to be
powered off and then powered on again.
Restore Factory
Yes
No
