REL iREL Systems, Manual

Page: 9 / 48

www.relinc.com iREL Systems
8
Chapter 2 – Operation
Getting Started
This line is controlled from two HMI screens. One is installed in the Paint Coater control
panel, CP-2000, and the other is in the Main control panel, CP-1000. The Overview screen
shows the status of each motor and allows you to select board size. Each Zone screen shows
the speed of each motor in that zone and with security login, allows you to manually turn on
all the motors in that zone. The Alarm Summary screen shows a list of alarms. It can be
accessed by pressing the “Go To Alarm” button on the Overview screen.
Overview
The Overview screen is for monitoring the system and selecting the main control functions.
Indicating Functions:
•
Motor Status:
o
Each motor will be green if it is running, grey if it is off, or red if it is faulted
•
Servo Motor Status:
o
The servo motors will be green if they are ready and grey if they are off or
faulted
•
Alarm/faulted motors/servos:
o
In the event that a motor faults, an alarm will be triggered and it will turn red
on the Overview screen
o
All active alarms will scroll across the bottom of the Overview screen and
across the top of its respective Zone screen.
o
Alarms can also be viewed on the Alarm Summary screen
•
Zone STATUS
o
There is an indicator for each zone, this will show gray when the zone is not
active and it will show green when the zone is enabled (or active)
•
ESTOP Status
o
This indicator will show green when an ESTOP is not tripped and it will show
red when an ESTOP is tripped
o
ESTOP NOTES:
•
There are (3) ESTOPs on the system, one each in CP-1000, CP-2000,
and on the Stacker/Accumulator Area guarding inside of the line