www.relinc.com
iREL
Systems
11
Zone Screens
The screens for Zone 0, Zone 3, Zone 4, Zone 6 and Zone 7 are all very similar. They show
each motor in its respective zone, and the number below each motor represents the
percentage at which it is running. The “Start/Stop Zone XX Motors” button allows users with
access to start an individual zone. The box on the top of the screen is where alarms just for
that respective zone will scroll. The status box next to each motor reflects the mode that each
motor is in, which are described below:
•
Grey
à
Set to Auto Mode
à
Off
•
Green
à
Set to Auto Mode
à
On
•
Orange
à
Set to Manual Mode
à
Off
•
Yellow
à
Set to Manual Mode
à
On
•
Red
à
Fault
The Zone 0 screen also has indication for the signal between our control system and the main
plant control system upstream and downstream from this system. The signals will show
gray when they are off and green when they are on.
Figure 4: Zone Screen
Summary of Contents for iREL Systems
