Pg. 20
Doc ID: 191-6300B
Doc Rev: 101722
Adjust the Installed Gap
Symptom
Reason
Solution
•
Clutch lever moves
in too far (too
much Free Play
Gain)
•
Clutch has
excessive drag or
stalls
•
It is difficult to fully
override the clutch
with the lever
Installed gap
is too small
Tighten the cable:
increase the length
of the in-line cable
adjuster housing
until the correct
amount of Free Play
Gain is achieved.
Recheck Free Play
Gain.
•
Clutch lever only
moves slightly or
does not move at
all (too little Free
Play Gain)
•
Clutch slips
•
Bike/ATV seems to
lose power
Installed gap
is too large
Loosen the cable:
Reduce the length of
the cable housing
(collapse the
adjusters) until the
correct amount of
Free Play Gain is
achieved.
Recheck Free Play
Gain.
