Pg. 10
Doc ID: 191-6300B
Doc Rev: 101722
Install Clutch Pack
1. Install all of the Rekluse basket sleeves into the basket
slots. Make sure the bottom of the sleeve is facing down,
and the sleeve tabs sit against the inside of the basket.
Note: When seated in the basket, the sleeve tops may sit
slightly above or below the top of the basket.
2. If the included
Setup Sheet
indicates your bike or ATV
reuses the judder spring, reinstall
only the judder
spring
, cupped side up.
3. Install the Rekluse clutch pack. The clutch pack varies
depending on the bike or ATV model.
See the included
Setup Sheet for the proper clutch pack
configuration.
Sleeve tabs sit inside the
basket
Install all the
basket sleeves
