Doc ID: 191-6300B
Doc Rev: 101722
Pg. 3
The parts in this kit are designed specifically for your
motorcycle to optimize performance. This kit will replace
several OE (Original Equipment) components with high-
quality Rekluse components.
•
The OE friction disks and drive plates will be replaced
with a Rekluse thin friction EXP clutch pack.
•
The OE pressure plate springs will be replaced with
Rekluse springs.
INSTALLATION TIPS
•
Read the included
Safety Information
document before
operating the vehicle with the product installed.
•
Read this entire document before performing any steps.
•
If you install this product for a
customer or another person, instruct
them to read the
Safety Information
document and the
Installation and
User Guide
before operating the
vehicle with the product.
•
Protect your eyes and skin
– wear
safety glasses and work gloves.
•
Lay the motorcycle on its left side when replacing the
clutch. This makes working on the clutch easier and
eliminates the need to drain the oil. Catch any fuel that
may drain from the bike.
•
Drain the oil from an ATV before installing the clutch.
•
Use the torque specifications found in your OE service
manual.
•
For optimal clutch performance, Rekluse recommends
using fresh, clean oil that
meets JASO-MA
oil rating
requirements. Rekluse offers Factory Formulated Oil™
developed specifically for Rekluse products. Rekluse
Factory Formulated Oil is a perfect complement to any
