Pg. 32
Doc ID: 191-7803A
Doc Rev: 011918
Adjusting the engine idle speed to match your engagement
setting is important and greatly affects the overall feel of how
the EXP disk engages.
You can tune the engagement RPM of the EXP disk by
changing the spring configuration. The EXP disk comes set
with the recommended
“Medium”
setting from Rekluse.
For
other EXP tuning options, see the Setup sheet.
To prevent freewheeling and maximize engine braking, set
the idle so there is a slight amount of drag while the bike is
idling in gear and warmed up. The idle should not be so high
as to move the bike forward in gear with the throttle closed.
With correct Free Play Gain and the bike in gear, the bike
should move forward under slight opening of the throttle. If
not, one of the following symptoms is likely:
·
HIGH IDLE: The bike moves forward with the throttle
fully closed. Solution: reduce idle RPM.
·
LOW IDLE: The bike moves forward after engine RPM
becomes noticeably higher than idle RPM. Solution:
increase idle RPM.
EXP TUNING OPTIONS
