S-AGR08gb01
05/15 - 3
Page 1 of 2
1 General
1.1 Introduction
This operating instruction contains information for the assembly and maintenance of the automatic
spray gun AGR-08. The technical data and procedures contained herein should be considered as
standard and may differ depending on the customized installation.
Because every system is designed differently, the automatic spray gun AGR-08 must only be
placed in operation by personnel authorised by REITER.
To better understand this device and to achieve optimum error-free operation for an extended pe-
riod, please read this operating instruction carefully. The specified fault identification should be per
-
formed before calling for a service technician.
The automatic spray gun AGR-08 is subject to additional development and improvements.
1.2
Operating area – Specified normal use
The automatic spray gun AGR-08 is designed for processing coatings based on solvents or water.
It must only be used to atomise materials that are explicitly listed in the order confirmation. Use of
other coating materials can only be considered if there is no possibility of:
•
hazard to people or the environment
•
harmful effects on the spray gun
In case of doubt, please contact the manufacturer of the automatic spray gun AGR-08.
The automatic spray gun AGR-08 is designed for use on a fixed location spraying system and on
the hollow wrist or flex arm robots, on automatic machines (hoisting devices), and on tripods.
Any usage beyond what is specified is considered improper use. The manufacturer shall not be re
-
sponsible for any resulting damages.
Table of Contents
1.1 Introduction ........................................................................................................................1
1.2
Operating area – Specified normal use
.............................................................................1
1.2.1
Usage contrary to intended use
.........................................................................................2
1.3 Guarantee ..........................................................................................................................2
1.4 Copyright............................................................................................................................2
