Reiner jetStamp graphic 970 Operating Manua Download

Page: 29 / 94

The Software Application PCset graphic

ERNST REINER GmbH & Co. KG

5.3.4

Device Safety

Device Safety

Unlocking Device

Lock Device

5.3.4.1

Device Safety

The device safety locks printing and protects the print data from abuse.

Devices without the current firmware version do not support device safety. The latest firmware
version can be downloaded from www.reiner.de in the area "Downloads

The device safety can be set in the menu bar

under tab "Extras "Device safety"

or in the toolbar

via the buttons

You can choose between

three

functions:

Device safety is deactivated.

Device safety is activated.

Print images

cannot

be transferred and printed without password input.

Device safety is activated.

Print images can be transferred and printed

without

password input.

Set password

Deactivate password protection

Password forgotten

Summary of Contents for jetStamp graphic 970































































































Search results

Summary of Contents for jetStamp graphic 970

Reviews:

Related manuals for jetStamp graphic 970

Brands by name

Popular brands

Reiner jetStamp graphic 970, Operating Manua

Search results

Summary of Contents for jetStamp graphic 970

Reviews:

Related manuals for jetStamp graphic 970

Brands by name

Popular brands