Reiner jetStamp 990, Operating Manual

Page: 41 / 56

Software application 990 REINER PCset 41
ERNST REINER GmbH & Co. KG
Originalanleitung
Numbering machine settings
Function Description
Step Indicates the interval at which the numbering machine counts on
(e.g. 1,4,7... in steps of 3).
Repetitions Indicates the number of repetitions of a print image. If, e.g., the
value 3 is set, the numbering machine remains on the same
number for three imprints before it counts on.
The repeat factor can be set from 0 to 99.
The numbering machine switches on at the value 0.
Counting direction backwards The numbering machine can count up (e.g. 10,11,12,...) or down
(e.g. 10,9,8...).
Number circle
The number circle defines the value range in which a numbering machine counts.
When the maximum or minimum value is reached (for upwards or downwards
counting numbering machine), the count is continued at the respective other end of the scale.
Function Description
Minimum This value marks the lower limit of the number circle and thereby
at the same time determines the number of digits to be printed if