Reinecker VEO VOX VEOVOT24, User Manual

Page: 31 / 36

31
Problem Solution
There is no image on the
monitor.
Check the main power connection, the cable con-
nection to the monitor or PC, and whether the rele-
vant systems are switched ON and working.
Image/Screen is (too)
dark.
Check the brightness and contrast settings of the
camera or monitor. Check that the light is illumina-
ting and not turned off.
Full color is not shown
correctly.
Check your reading document, color mode setting,
brightness, color saturation and camera lighting.
„Continous reading“
doesn´t work anymore.
Make sure that the item „automatic continous rea-
ding“ at VOX menu at „Recognition“ is enabled.
My invoice is read out
column by column, but it
should be read out line by
line.
Make sure that the „Single column recognition“ item
at the VOX menu at „Recognition“ is
enabled
.
My newspaper is read out
completely line by line,
but it should be read out
in columns.
Make sure that the „Single colomn recognition“ item
at the VOX menu at „Recognition“ is disabled .
In still capture mode, the
word that is being read
jumps back and forth on
the monitor.
Make sure that the item „Center on word“ at the
VOX menu „Visualisations“ is enabled .
Zooming in and out with
„two-finger dragging“
does not work.
This is not a fault. Your VEO VOX monitor is a resi-
stive touch screen. Resistive touch screens react
to pressure. Therefore, „2-finger dragging“ is not
possible.
Troubleshooting