14
Positioning of the remote control
The remote-control can be magnetically attached to the front of the monitor, the right
side of the xy table, or can be handheld
.
1.
Positioning of the remote
control underneath the
monitor
2.
Positioning the remote
control at the right side on
the xy-table
Turn ON and booting of VEO VOX
After the reading system has been connected correctly to a power supply, turn the
unit ON by pressing the large center Zoom +/- button on the remote control. A short
flash of the lighting will appear. After a few seconds, the lighting will turn ON with the
latest chosen light level. The system needs approx. 30 seconds for complete booting
then it is ready for use.
Note:
If the xy-table is not illuminated, double check all cable connections.
Also check, if the illumination/lighting has been switched OFF manually (see chapter
Lighting ON/Dim/OFF on page 27).
1
2
Summary of Contents for VEO VOX VEOVOT24
Page 2: ...2...
Page 34: ...Notes...
