31
PORTA
BASE
Conformité Européenne [CE]
REID Lifting’s products have been designed,
tested and approved (as appropriate) by the
Conformité Européenne. This certifies that REID
Lifting’s products meet the demands of the
European Directives and Regulations regarding
Health and Safety requirements. The EC type-
examination for this device has been carried
out by SGS United Kingdom Ltd, 202b, Worle
Parkway, Weston-super-Mare, BS22 6WA, United
Kingdom (CE body no.0120) in accordance
with Module B of the PPE Regulation. The EC
quality assurance system for this device has been
carried out by SGS Fimko Oy, Takomotie 8, FI-
00380 Helsinki, Finland. (CE body no. 0598) in
accordance with Module D PPE Regulation (EU)
2016/425.
Testing
Testing and technical file review are integral
parts of our design and manufacturing process.
External verification of products is undertaken
where appropriate, using government approved
Notified Bodies.
All products have been thoroughly type tested.
Each product is supplied with a certificate of
conformance and individual record of thorough
examination or test.
Language
It is essential for the safety of the user that if
this product is re-sold outside of the original
country of destination, the reseller shall provide
instructions for use, maintenance, inspection and
repair in the language of the country where it will
be used.
Product IPR
Intellectual property rights apply to all REID
Lifting Ltd products. There are patents in place,
or pending, for:
All product names are trademarks of REID Lifting Ltd:
PORTA
DAVIT
PORTA
BASE
PORTA
QUAD
PORTA
GANTRY
RAPIDE
PORTA
DAVIT
QUANTUM
T
DAVIT
PORTA
GANTRY
PORTA
GANTRY
RAPIDE
T
DAVIT
PORTA
GANTRY
Regulations, Standards & Directives
This product complies with the following:
ANSI Z359.18-2017
I
n conformity with EN795:2012 and OSHA 1910
subpart I, OSHA 1910.66 Appendix C (I) and
OSHA 1926.502 subpart M
The Lifting Operations and Lifting Equipment
Regulations 1998 (S.I. 1998 No. 2307)
The Provision and Use of Work Equipment
Regulations 1998 (S.I. 1998 No. 2306)
Machinery Directive 2006/42/EC
PPE Regulation (EU) 2016/425
ATEX Directive - 2014/34/EU*
*Powder coated sections removed
It is essential to adhere to the safety regulations
of the respective country for using manual lifting
equipment.
Quality & Safety
Accreditations
Quality and Safety are at the heart of the REID
Lifting ethos and we are committed to maintaining
the very highest standards. With this in mind, we
have undertaken external accreditations to ensure
we stay focused on what is important to our
clients and users, and ahead of market trends and
developments.
REID Lifting is continuously audited by Lloyds
Register Quality Assurance (LRQA) for approval
of its Integrated Management System combining
quality systems management, environmental
issues and the health and safety practices within
the company.
ISO 9001:2015 - Quality management
system which assesses an organization’s
ability to consistently provide products that
meet customer and applicable regulatory
requirements and aims to enhance customer
satisfaction.
ISO 14001:2015 - Specifies the requirements
for implementing environmental management
systems throughout all areas of the organization.
ISO 45001 – Health & Safety Management
System
LEEA Membership - REID Lifting is a full member
of the Lifting Equipment Engineers Association
(LEEA membership 000897). REID Lifting
conforms to the main aims of the association
which is to achieve the highest standards
of quality and integrity in the operations of
members. Entry qualifications are demanding
and strictly enforced through technical audits
based on the Technical Requirements for
Members.
IRATA - REID Lifting is an associate member of
the Industrial Rope Access Trade Association
(IRATA International membership number 148).
REID Lifting works in accordance with the IRATA
Code of Practice and, in doing so, contributes to
promote the development of safe systems.
