14
switch will start the charge process with 0.8A current. If no error
occurs, (CHARGE) will remain lit during the whole charging session
until the battery is charged to 14.4V. When the battery is fully
charged, the LED (FULL) will be lit, and a trickle charge takes place
to keep the battery properly charged.
[3] MODE 2 (14.4V/3.8A; > 14Ah)
This mode is meant for charging batteries with larger capacity of
more than 14Ah. To charge the battery, connect the output connectors
of the charger to the battery with the right polarity. After selecting the
operation mode once the charging process can be started by pressing
the mode button. The corresponding LED (>14Ah) will light up and
after a short delay, if no further operation is conducted, the electronic
switch will start the charge process with 3.8A current. If no error
occurs, (CHARGE) will remain lit during the whole charging session
until the battery is charged to 14.4V. When the battery is fully
charged, the LED (FULL) will be lit, and a trickle charge takes place
to keep the battery properly charged.
[4] MODE 3 (14.7V/3.8A; COLD)
This mode is established for charging those batteries with larger
capacity of more than 14Ah in cold ambient condition or charging
some AGM batteries with capacity of more than 14Ah. To charge the
battery, connect the output connectors of the charger to the battery
with the right polarity. After selecting the operation mode once the
charging process can be started by pressing the mode button. The
corresponding LED (COLD) will light up and after a short delay, if no
further operation is conducted, the electronic switch will start the
charge process with 3.8A current. If no error occurs, (CHARGE) will
remain lit during the whole charging session until the battery is
charged to 14.7V. When the battery is fully charged, the LED (FULL)
will be lit, and a trickle charge takes place to keep the battery properly
charged.
[5] RESCUE DEEP DISCHARGED BATTERY
