background image

12 

 

 

FCC STATEMENT 

This device complies with part 15 of the FCC Rules. Operation is subject to the 

following

 

two conditions: 

 

(1) This device may not cause harmful interference, and  

(2) This device must accept any interference received, including interference that may 

cause undesired operation.  

 

NOTE: This equipment has been tested and found to comply with the limits for a Class 

B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to 

provide reasonable protection against harmful interference in a residential installation.  

This equipment generates, uses and can radiate radio frequency energy and, if not 

installed and used in accordance with the instructions, may cause harmful interference 

to radio communications. However, there is no guarantee that interference will not 

occur in a particular installation.  

If this equipment does cause harmful interference to radio or television reception, 

which can be determined by turning the equipment off and on, the user is encouraged 

to try to correct the interference by one or more of the following measures:  

—Reorient or relocate the receiving antenna.  

—Increase the separation between the equipment and receiver.  

—Connect the equipment into an outlet on a circuit different from that to which the 

receiver is connected.  

—Consult the dealer or an experienced radio/TV technician for help.  

Changes or modifications not expressly approved by the party responsible for 

compliance could void the user's authority to operate the equipment. 

 

Summary of Contents for WUHD-PRO













Reviews: