MULTI-PURPOSE PROBE
85
5.
Upon connecting the MPP, if the OSCOR unit is powered on and using the built-in antenna
panel, you will be presented with a dialog box.
6.
Select
Yes
or press
F5
to switch the RF input to the MPP. The
Aux RF
icon in the Setup Menu will
be replaced with an
MPP
icon. Also, a tabbed panel will be added displaying options for all of
the inputs.
Notes
-
If you select
No
when prompted to switch inputs to the MPP, the OSCOR unit will continue to
use the built-in antenna panel. To switch to the MPP input at a later point, select the
MPP
icon
from the Setup Sub-Menu.
-
Avoid connecting the MPP during start-up of the OSCOR unit; either connect the MPP before the
unit is powered on
or
wait until the boot sequence is finished.
Summary of Contents for OSCOR Blue
Page 2: ......
Page 122: ...APPENDIX A15...
