page 10
No.
Name
Function Description
3.
DC 24V
DC 24V/1A power supply input port.
Note that the extender supports PoC function, it
means that either transmitter or receiver is powered
on by 24V/1A power adapter, the other one doesn’t
need power supply.
4.
HDBT IN
RJ45 connector for connecting the HDBT OUT port of
transmitter with a CAT 5e/6 cable.
5.
Connection
Signal
Indicator lamp
Illuminating:
Transmitter and Receiver are in good
connection status.
Flashing:
Transmitter and Receiver are in poor con-
nection status.
Dark:
Transmitter and Receiver are not connected.
6.
Data Signal
Indicator lamp
Illuminating:
HDMI signal with HDCP.
Flashing:
HDMI signal without HDCP.
Dark:
No HDMI signal.
7.
HDMI OUT
HDMI output for display.
8.
AUDIO OUT
3.5mm stereo connector for analog audio output.
9.
IR IN
IR input port for receiving the signal of IR remote.
10.
IR OUT
IR output port for control of display device. This IR
output signal is from the IR IN port of transmitter.
11.
RS-232
3-pin Phoenix connector for RS-232 command trans-
mission.The RS-232 command will pass-through from
transmitter to receiver or from receiver to transmitter.
Operation Controls
and Functions
