REHM BARRACUDA RTC 100, Operating Instructions Manual

Page: 54 / 55

EC Declaration of Conformity
We hereby confirm that the following products
Plasma Cutting Equipment
BARRACUDA RTC 60
BARRACUDA RTC 100
BARRACUDA RTC 150
meet all the major protection requirements laid down in the Council Directive 2004/108/EC (EMC directive)
on the approximation of the laws of the Member States relating to electromagnetic compatibility and
stipulated in the Directive
2006/95/EC relating to electrical equipment designed for use within certain
voltage limits.
The aforementioned products comply with the provisions of this Directive and meet the safety requirements
applicable to equipment for arc welding in accordance with the following product standards:
EN 60 974-1: 2006-07
Arc welding equipment
–
Part 1: Welding power sources
EN 60 974-2: 2003-09
Arc welding equipment
–
Part 2: Liquid cooling systems
EN 60 974-3: 2004-04
Arc welding equipment
–
Part 3: Arc striking and stabilizing devices
EN 60 974-8: 2004-12
Arc welding equipment
–
Part 8: Gas consoles for welding and plasma cutting systems
EN 60974-10: 2004-01
Arc welding equipment
–
Part 10: Electromagnetic compatibility (EMC) requirements
According to EC Directive 2006/42/EG Article 1, para. 2, the above products come exclusively within the
scope of Directive 2006/95/EEC relating to electrical equipment designed for use within certain voltage
limits.
This declaration is made on behalf of the manufacturer:
REHM GmbH u. Co. KG Schweißtechnik
Ottostr. 2
73066 Uhingen Germany
Uhingen, 24 April 2007
Declaration made by R. Stumpp
Managing Director