REHATEAM s.r.l.—vicolo Negrelli 5—31040 Castagnole di Paese TV
-
www.rehateamprogeo.com
Service Manual BASIC LIGHT 14
SERVICE MANUAL
ONE PIECE FLIP-UP PLASTIC FOOTPLATE
You can also change the position of the sole plate with respect to the structure under it that is fixed to
.
Remove the three bolts
B
. To hold the nuts
C
no spanner is needed.
Observe the distance
D
that you will have to keep after changing position. It is useful to mark it or measure it in order to have a reference.
Remove the plate. You will see the two parts of the lower structure free.
Position the plate in the opposite side on the lower structure and align the holes of all components.
Make sure to keep the same distance
D
at right and left and equal to the reference you took earlier.
Insert the bolts
B
and the nuts
C
and tighten until compacting the parts (tightening hard is not necessary).
When reversing the sole plate, you can turn the footplate position from internal to 2/3 internal (or vice versa) or from external to 2/3 external
(or vice versa).
The lock side remains the same.
To adjust the friction of the footplate rotation movement, tighten or loosen the bolt
E
.
It may be necessary to hold the nut
F
with a wrench.
Usually, when the footplate is lifted up the adjustment holds its position.
D1 D2 D1 D2
D1 D2 diverse
D1 = D2
E
F
E
B
C
D
