13
MAINTENANCE
General Maintenance
Keep the unit clean.
Check all connections at least once a month to insure tightness.
Clean pulleys at least once a month using compressed air.
Cars
The cars may become loose over a period of time. Loose cars can damage the
rails. If the cars become loose, tighten the set screw, located in the center
hole on the bottom of the car. Be careful not to overtighten the set screw.
SPECIFICATIONS
Height: Raised:
45 inches
Lowered:
33 inches
Length:
62 inches
Width:
39 inches
Weight:
285 lbs.
Materials
Housing:
ABS Plastic
Rails:
Extruded Aluminum
Cars:
Extruded Aluminum
Trucks:
Extruded Aluminum
V-Section:
Cast Aluminum
Handles:
Aluminum Tubing with Plastic Grips
Strut Assembly:
Steel
Base Assembly:
Steel
Resistance Assembly
Friction Brake
Brake Wheel:
Stainless Steel
Brake Arms:
Aluminum
Brake Pads:
Composite Brake Lining Material
(non-asbestos)
Resistance Lever:
Steel
Timer/Pulse Monitor
Powered by (3) AAA Batteries
Timer
Range: 0-60 minutes
Pulse Monitor
Compatible with Polar Equipment
Receiving
Signal: 5 khz