Press the moveable exterior part upward, the moveable
parts of the SOLIDCLIP will be pushed together.
Now you can screw the toilet seat height adjuster finger-
tight on the toilet bowl.
Now plug the armrests
into the tubular sockets on
the sides in the back. The armrests must be locked in place by the
spring closures and can be folded backward independently of each
other.
4. Safety notice
•
Check the fixed position on the screw connectors at regular intervals!
•
The armrests may only be equally loaded and only serve as supports.
•
Risk of slippage– dry the item before using the toilet.
•
Make sure that the height adjustment rods are securely screwed in place.
•
Make sure that the toilet seat height adjuster is always firmly affixed to the WC-bowl.
•
Do not continue using this assistive device if you notice damage to the surface of the seat.
•
Do not expose the assistive device to any temperatures higher than 85°C.
•
The toilet seat height adjuster has a maximum load capacity of 130 kg.
5. Cleaning instructions
:
For cleaning it, use a soap solution. The cleaning agent should have a pH-value of at least 6. Disinfect
using a conventional agent according to the manufacturer’s instructions e.g. RFM Sept. Do not use
any abrasive or corrosive agents or pressure or steam washers!
6. Information about repairs
In the event of a return contact the distributor or manufacturer of the toilet seat height adjuster. For
service please contact a dealer.
7. Technical data/ dimensinos and weight
-
Seat width
38
cm
-
Width over the armrests
58.5
cm
-
Total width
58.5
cm
-
Space between arm rests
48.3
cm
-
Height front
17
cm
-
Height back
19
cm
-
Opening width
22,5
cm
-
Opening depth
29.5
cm
-
Weight
5,6
kg
-
Load capacity
130
kg
