Lat Pull Assembly
Attach the overhang to the backbone with
the 2x, 4” long, ½” socket head bolts and
tighten them all the way using the provided
½” nylon nuts.
Unscrew the bolt on top of the first weight
increment and thread the provided lat wire
through the center hole. Re-attach the bolt
and tighten the counter nut. Please disregard
this step if the wire is zip-tied to the guide
rod (this step is already done).
Then bring the wire up vertically, through
the top box, and bring it around the wheel
closest to the backbone (back to front).
Bring the wire downward and thread it
around the wheel on the “adjustment glider”
front to back (wheel market as “2” on the
drawing to the left).
Make sure the glider is
placed at its lowest position (down by
wheel “4”).
Bring the wire back up and
thread it over the two remaining wheels so it
stick out the front of the wheel “A”, the
wheel furthest away from the backbone.
Wire Tightener Assembly